|
|
HARD SURFACES |
 |
Use Spinergy 2 acid cleaner
for man-made ceramic, porcelain and quarry tile. It takes care of the
mineral scale, soap scum and imbedded stains often found on restroom and
shower tile. This special formula also cuts grease incredibly well and
does it without any added solvents. Packaged in gallons. pH is 2 and
mixed 1:4 for routine cleaning.
|
 |
Use Spinergy 7 hard surface
rinse & cleaner to rinse with after cleaning with Spinergy 2 or Spinergy
11. It's also excellent as a stand alone cleaner when used in regular
maintenance through scrubbing equipment, extractors or mop and bucket.
It cuts and suspends dirt and grease and leaves floors sparkling clean.
Packaged in gallons. pH is 7-8 and mixed 1:64 for routine cleaning.
|
 |
Use Spinergy 11 alkaline
cleaner for tile and grout melts away years of built-up grease, stains
and soil, and does it without the use of solvents or caustic builders.
Spray it on ceramic porcelain and quarry tile. Packaged in gallons. pH
is 7-8 and mixed 1:4 for heavy duty cleaning.
|
 |
Viper Venom is a high
alkaline, solvent fortified chemical to deal with heavy soil on hard
surfaces.
The original tile and grout cleaner, it
removes years of built up grease, dirt and stains. Packaged in gallons.
ph is 12 and mix it 1:1 for tough jobs, more for lighter jobs. |
 |
Hydro-Break is a great
all-purpose prespray for residential and commercial carpets and for
oriental rugs. It is also well-formulated for bonnet-cleaning! Using
Hydro-Break, you can achieve great penetration and soil suspension. This
one's your work-horse. Rinses easily, and leaves low residue.
Packaged in gallons. ph is 9.5 and mix it 1:8 for routine cleaning. |
|
 |
Dynamite Wax and Finish
Stripper is especially formulated to remove long-term build-ups of all
water based waxes and synthetic polymer floor finishes including metal
interlocked detergent-resistant finishes. Dynamite can also be used as
an economical and effective industrial cleaner, it penetrates, reacts,
and suspends greasy soil and wax in solution for easy rinsing. Dynamite
may be sprayed, brushed, or mopped on and can also be used in
conjunction with pressure sprayers, steam cleaning equipment, and
automatic scrubbers. Packaged in gallons.
ph is 12.5-13 and mix it 1:16 for routine cleaning. |
|
|
|
 |
Acclaim for the "Finishing
Touch" on all types of resilient tile floors, terrazzo, and sealed wood
floors. Acclaim levels smoothly for the ultimate gloss and is highly
resistant to black heel marks and scuffing. Acclaim is slip resistant
and meet or exceeds ASTM specifications. Acclaim retains its high gloss
even after detergent damp mopping and scrubbing, yet it is easily spray
buffed, recoated, repaired, or removed.
Packaged in gallons. ph is 12.5-13 and mix it 1:16 for routine cleaning. |
|
|
|
|
 |
New Heights is formulated
to provide the best looking floor in today's ultra high speed burnishing
regiments. This product is a proven blend of internally cross linked and
thermoplastic polymers and balanced microcrystalline waxes. The
resulting film is durable and will withstand high traffic. The
burnishing characteristics built into New Heights will keep the
appearance and gloss at near "just waxed" levels. New Heights will
continue to outperform other finishes by repairing to peak appearance
upon burnishing many times over. Packaged
in gallons and ph is 8.8-9.2. |
|
|
|
 |
25X for the "Finishing
Touch" on all types of resilient tile floors, Terrazzo, and sealed wood
floors. 25X levels smoothly for the ultimate gloss and is highly
resistant to black heel marks, scuffing, powdering and water spots. 25X
retains its high gloss even after detergent damp mopping and scrubbing,
yet it is easily sprayed buffed, recoated, repaired, or removed.
Packaged in gallons and ph is 9.0-9.4. |
|
|
|
|
 |
Secure Floor Sealer &
Finish, utilizes the latest formulation technology to provide stain
protective properties in a combination seal and finish for all types of
resilient tile. Secure provides superior durability and high gloss with
exceptional leveling properties ideally suited to be used as a finish.
It's like having three products in one: A Stain barrier seal that has
the capability of resisting the passage of stain causing agents--coal
tar, asphalt, anti-oxidants, etc. which can damage the floor. A leveling
sealer that provides a good base for multiple top coats of ultra high
speed floor finish. Packaged in gallons and
ph is 8.5-9.0. |
|
|
|
|
 |
Nutra Clean is a floor
cleaner concentrate formulated to reduce the time and labor costs of
daily maintenance of high gloss metal interlock floor finishes. Nutra
Clean won't harm the finish. Nutra Clean has controlled suds for use in
auto-scrubbers. Nutra Clean is quick drying and leaves no residue or
haze to dull the original luster of high gloss finishes. Floor
appearance is actually enhanced and the life of the finish substantially
extended. Packaged in gallons and ph is
7.0-8.0. |
 |
Winner's Circle is
developed with the latest floor restoration technology. This cleaner and
floor finish maintainer can be used by either hand mopping or with an
automatic scrubber. It deep cleans and repairs scuff marks and scratches
while leaving behind a micro thin layer that burnishes to a brilliant
high gloss. |
 |
Pro Strip HD is a high
active stripping compound formulated for quick removal of multiple coats
of burnished floor finish. It is a special blend of emulsifiable
solvents, wetting agents and amine compounds to strip even the hardest
finishes. Excellent in autoscrubbers because of the controlled foam
capabilities. Pro Strip HD will do the job on floors that get burnished,
restored, recoated and spray buffed. |
 |
Enhancer Pro richens color, and provides heavy duty
protection against all stains. It is solvent-based, and good for
interior & exterior use. |
 |
Honing Powder is used on natural stone such as marble,
limestone, travertine & terrazzo. Creates honed finishes. Sets up stone
for polishing and shinning. Different grits (180 to 800) for eliminate
mild to deep scratches. Work your way through the Honing
Powders to create rough or smooth finishes depending on your style. The
possibilities are endless. |
 |
Polishing Powder is used on natural stone such as
marble, limestone, travertine & terrazzo. Creates a smooth, satin
finish. Eliminates etch marks & light wear patterns |
 |
Shining Powder is used on natural stone such as marble,
limestone, travertine & terrazzo. Creates a high shine finish. Brings
back luster of polished stone. |
 |
Grouter Sealer is used on grout for ceramic & porcelain
tile. Provides heavy duty protection against all stains. Protects grout
& makes cleaning easier. Natural look. Water-based for interior &
exterior use. |
 |
Impregnator Pro is used on natural stone such as
marble, granite, limestone, slate, terrazzo, travertine & sandstone.
Best suited for the most porous stone surfaces. Provides heavy duty
protection against all stains. Original fluorochemical technology.
Natural look. Solvent-based for interior & exterior use. |
 |
Klenzall is used on natural stone such as marble,
granite, limestone, travertine, slate, terrazzo & sandstone. Ceramic
tile, porcelain tile & grout. Masonry & concrete. Powers through
stubborn grease & soils. Safe on stone, will not etch. Professional
strength, alkaline formula. |
 |
Grout Release is used on natural stone such as marble,
limestone, travertine, slate, sandstone & tumbled stone. Masonry &
concrete. Makes grout clean-up easy. Reduces grout staining. Water-based
silicone for interior & exterior use. |
 |
Restore is used on ceramic tile, porcelain tile &
grout. Masonry & concrete. Renews tile & grout. Cleans away hard water
deposits, grout haze, efflorescence & soap scum. Professional strength,
acidic formula. |
 |
Revitalizer is used on natural stone such as marble,
granite, limestone, slate, terrazzo, travertine & sandstone. Ceramic
Porcelain & Tile. Best suited for the most porous stone surfaces. Mold &
mildew resistant protector. Cleans everyday messes while reinforcing
protection. Built-in sealer makes surfaces easier to clean. Neutral,
gentle formula. |
|
 |
Lacquer is used on natural stone, masonry & concrete
(outdoor patios, walkways, driveways, garage floors, concrete slabs,
sidewalks, retaining walls & BBQ areas). Not intended for use on dense,
glazed, polished, or non-absorbing surfaces (ceramic tile, porcelain
tile), wood floors & decks. Topical high gloss look & richens color.
Weather resistant. Maximum protection against all stains. Solvent-based
for interior & exterior use. |
 |
Clear Grout Sealer is a premium grout sealer designed to
be used with the Hydro-Force grout dyes. Carry just this one base
product and add any one of eight dye colors to achieve amazing natural
looking grout in an all new color. This product makes the dyed grout
much stronger along with excellent soil and oil resistance and soil
release when cleaning. Once cured, it is impervious to cleaning agents,
even the heavy-duty type. |
 |
Solvent Grout Sealer is a low odor solvent based sealer.
Use on any non-sealed cementitious surfaces. It does not change the
texture or color of the current grout when dry. |
